EMCc is a supervisory platform, delivered complete, for distributed energy: from a single battery site to a fleet of sites.
Built in Hawaii, where every grid is an island.
Multi-vendor sites are the norm, so EMCc talks to everything on them.
Islanded and grid-tied, with control logic that runs on site.
SOC, charge and discharge logic, BMS telemetry and alarms.
Generation, load and storage on one screen.
Master and Slave sites, aggregated and commanded from one place.
MODBUS, CANBUS, SNMP, JSON, XML and MQTT side by side.
Native translation between protocols, with no gateway hardware or middleware.
Motion control, sequencing and safety systems stay on PLCs and safety-rated controllers. EMCc reads and commands them like any other device.
Reads PLCs and controllers over the protocols they already speak
Supervises, trends and alarms across every vendor
Sends setpoints and commands through Formulas
Leaves safety-rated control where it belongs
We'll connect to a working EMCc site over a secure VPN tunnel and show you Datum, Formulas, alarms and dashboards, edited live while the site keeps running.
Efficiency = Monitoring & Control Capability
EMC2 Technologies builds EMCc, a hardware-agnostic monitoring and control platform for microgrids and energy storage. Made in Hawaii.
Request a demoinfo@emc2tech.com
support@emc2tech.com
Hawaii, USA
Parallel by design
Configured, not programmed
Agnostic all the way down
© 2026 EMC2 Technologies, LLC
